Add sections to your Schacht Variable Dent Reed
Each Section is approx. 2” wide.
Made by Schacht Spindle, Colorado.
Broad, sturdy shuttle have been traditionally used for rag weaving, though they are also excellent for heavy thick yarns and bulky chenilles. 20” long.
Danish oil finish
764459904196
Made by Schacht Spindle
Made by Schacht Spindle
Stick shuttles are the simplest and most versatile of all shuttles. Choose a stick shuttle close to the width of your warp or the weaving width of your loom.
Danish oil finish
Free Shipping to U.S. lower 48.
Schacht Double-end winder can be used for bobbins, pirns, and large-flanged spools up to 9″ long and 5-1/2″ in diameter.
A clamp is incorporated into the base; they are belt-driven with self-lubricating bronze bearings.
Convenient storage for Schacht’s Standard Floor Loom.
The sturdy nylon sleeve can hold your shuttles and tools—even sharp scissors—right at the front of your loom. Clamp the trap to the front legs of your loom when you’re ready to weave, and remove it for warping.
Simple assembly with #2 Phillips screwdriver.
Made of Maple.
The 45" trap will not fit the 42" looms. Please measure your loom or check its serial number—if it's below 4-1256, you may have a 42" loom
Sorry no Free Shipping on this item.
Due to the size and dimension of this tool please order separately. Unless you are picking up.
764459908354
FL3835
6/3/26. Production of this Schacht product has been temporarily suspended. Sign up for email notifications If you would like to be notified when available to order.
Durability—made of solid maple hardwood and maple plywood to hold its shape even under the high tension tapestry weaving requires, warp after warp after warp.
Precise tension control.
Generous sizing—20" weaving width and a continuous warp of 45". For longer warps, add the optional beam kit upgrade with ratcheted cloth and warp beams.
Convenient warping—set the loom in a horizontal or vertical position to warp in a way that is comfortable to you.
Integrated cartoon holder—clip your cartoon to it just below the warp guide.
Shedding device—smooth-working and adjustable, plus easily controlled with the hand lever. The lever may be installed on the right or left side of the loom.
Warps can be doubled in the dent coils for closer setts.
Convenient and ergonomic design—set the loom height and weaving angle that is most comfortable for you.
Portable—loom weighs 10 pounds and legs fold up for travel or storage.
PDF Manual: Assembly, Warping & Weaving
Arras Tapestry Loom plus all the options - Loom, Floor Stand, Treadle Kit, Beam Kit, Raddle and Two Traps.
LOOM OPTIONS
Accessories to attach to the Arras Tapestry Loom. If you would like to add options to your Arras Loom purchase leave a message when ordering.
Beam extension Kit: Wind longer warps on your Arras Tapestry Loom with this kit. It includes a sturdy base, plus ratcheted warp and cloth beams for superb tensioning control.
Arras beam kit will fit on all Arras looms. Assembly is simple and requires only a #2 Phillips screwdriver.
Once you've installed the kit, you will need a raddle no more than 20" wide to warp the loom. The Schacht raddle for warps up to 20" wide perfectly fits the loom. If you don't have a raddle be sure to order it with extension kit.
Accessories can be added and shipped with your new loom. Leave message when ordering loom or Contact us with your additions.
Special order this will ship direct from Schacht in Colorado.
Click here for expected shipment time.
Free Shipping to your continental U.S. physical address that matches your payment card account. Or if you are picking up at our location.
Enter Discount Code: SCHACHTFREESHIP
Do not enter discount code if shipping to a P.O. Box or Address that is not your card billing address.
Contact us for shipments to Alaska or Hawaii. Include your order and shipping address. We will invoice you total due with secure payment link.
Tapestry weaving just got easier.
6/3/26. Production of this Schacht product has been temporarily suspended. Sign up for email notifications If you would like to be notified when available to order.
Reclaim your table space and enhance your weaving comfort with the Arras Stand. It can be added to any Arras Tapestry Loom, with or without the Arras Beam Kit. It is adjustable in height and takes up minimal floor space. Rubber feet keep the legs in place on the floor.
Enjoy the same features you currently love about your Arras loom—ease of shedding, superior tension, adjustability—but with enhanced efficiency and ease.
Arras Treadle Kit adds even more efficiency to your weaving. Space treadles to your individual preference, then operate the shedding device with your feet.
Arras Trap Place your Trap on the Arras Tapestry Loom above the shedding device so that your tools are always where you need them. With Arras Floor Stand, you can have two Traps for even more storage.
Special order this will ship direct from Schacht in Colorado.
Click here for expected shipment time.
Free Shipping to your continental U.S. physical address that matches your payment card account. Or if you are picking up at our location.
Enter Discount Code: SCHACHTFREESHIP
Do not enter discount code if shipping to a P.O. Box or Address that is not your card billing address.
Contact us for shipments to Alaska or Hawaii. Include your order and shipping address. We will invoice you total due with secure payment link.
Schacht electric bobbin winder is double-ended and will accommodate bobbins, spools, and pirns up to 9″ long and with flanges up to 4″ in diameter.
6/3/26. Production of this Schacht product has been temporarily suspended. Sign up for email notifications If you would like to be notified when available to order.
An electric winder saves time, especially when there’s a lot of winding to do. The speed of the winder is controlled by a foot-powered rheostat like that of a sewing machine.
Special order this will ship direct from Schacht in Colorado.
Click here for expected shipment time.
Free Shipping to your continental U.S. physical address that matches your payment card account. Or if you are picking up at our location.
Enter Discount Code: SCHACHTFREESHIP
Do not enter discount code if shipping to a P.O. Box or Address that is not your card billing address.
Contact us for shipments to Alaska or Hawaii. Include your order and shipping address. We will invoice you total due with secure payment link.
Schacht Flip Folding rigid heddle loom, is comfortable, compact, sturdy, and a pleasure to weave on. Designed for high performance, this loom folds in a jiffy for storage or transport.
6/3/26. Production of the 15” & 30” Schacht Flip has been temporarily suspended. Sign up for email notifications If you would like to be notified when available to order.
Weave in comfort. Choose three different weaving modes: use the rear leg for hooking to a table edge, clamp it to a table for stand-up weaving, or install it on the optional convenient trestle stand. Fine-toothed nylon ratchets provide precise tension control. The conveniently located heddle blocks on the sides of the loom hold the rigid heddle in the up, down, or neutral position.
Flip is ideal for plain weaves and pick-up patterns. The exclusively-designed two heddle capabilities make sense of 2-heddle weaving for the first time (you will need two heddles of the same dent).
Warp in a flash. Included with Flip, are clamps and a warping peg for direct-loom warping. includes instructions for both direct and pre-measuring methods (using warp board sold separately).
The top cross brace allows long warps, up to 5-6 yards (depending on weight and winding paper), to be wound on the beams without impacting the size of the shed.
Included with loom one heddle reed, (5, 8, 10, 12 or 15 dent) You chose. Enter Size when ordering. Warping peg Two stick shuttles Threading hook and complete warping and weaving instructions.
Schacht Flip Assembly, Warping & Weaving Manual
The heddle, available in 5, 8, 10 and 12 dents per inch, is made of durable ABS plastic, with large eyes and slots.
Trestle Floor Stand
Schacht trestle stand fits all of the Flip looms. Adjust the arms to position your loom from horizontal to nearly vertical. When the loom is in the horizontal position, it sits at just the right height for use with a standard chair. The quick-release system makes it easy to remove your loom from the stand for travel or storage.
If you would like to add additional heddles, loom bag or other accessories with your loom purchase, leave message when ordering, will invoice you with secure payment link.
Special order will ship direct from Schacht in Colorado.
Click here for expected shipment time.
Free Shipping to your continental U.S. physical address that matches your payment card account. Or if you are picking up at our location.
Enter Discount Code: SCHACHTFREESHIP
Do not enter discount code if shipping to a P.O. Box or Address that is not your card billing address.
Contact us for shipments to Alaska or Hawaii. Include your order and shipping address. We will invoice you total due with secure payment link.
Schacht loom bench is a beautiful companion piece to our Wolf and Standard floor looms.
The bench seat height is adjustable from 19″ to 24″ and has been designed to offer you a flat or slanted seat position. The bench is free of side posts, which allows you to move around unrestricted. Below the seat is a storage bin for holding your accessories. The loom bench is available in cherry and maple.
Optional bench bags The bags are made of durable Cordura cloth and can be mounted on either or both sides of the bench seat. They are available with cherry or maple end bars.
Special order this will ship direct from Schacht in Colorado.
Click here for expected shipment time.
Free Shipping to your continental U.S. physical address that matches your payment card account. Or if you are picking up at our location.
Enter Discount Code: SCHACHTFREESHIP
Do not enter discount code if shipping to a P.O. Box or Address that is not your card billing address.
Contact us for shipments to Alaska or Hawaii. Include your order and shipping address. We will invoice you total due with secure payment link.
Maple Bench UPC 764459902345
Cherry Bench UPC 764459902345
The spool rack is essential for sectional warping. Schacht rack will hold up to forty 4″ spools and has a center post that pivots for easy loading and unloading. The center post locks into place during use. Even though the spool rack is generally used for sectional warping. It can be indispensable for other studio tasks as well: holding standard yarn tubes and bobbins or as a place to clamp a swift or ball winder.
6/3/26. Production of this Schacht product has been temporarily suspended. Sign up for email notifications If you would like to be notified when available to order.
Spools with metal ends ideal for sectional warping, storing handspun yarn, and more! These spools with metal ends fit Schacht double ended hand winder and electric bobbin winder.
Special order this will ship direct from Schacht in Colorado.
Click here for expected shipment time.
Free Shipping to your continental U.S. physical address that matches your payment card account. Or if you are picking up at our location.
Enter Discount Code: SCHACHTFREESHIP
Do not enter discount code if shipping to a P.O. Box or Address that is not your card billing address.
Contact us for shipments to Alaska or Hawaii. Include your order and shipping address. We will invoice you total due with secure payment link.
UPC 764459905582
The Schacht Tension Box features a mounting bracket that adjusts to fit all Schacht looms: Wolf, Standard, or Cranbrook.
6/3/26. Production of this Schacht product has been temporarily suspended. Sign up for email notifications If you would like to be notified when available to order.
It should be compatible with floor looms other than Schacht as well.
Features include: two-sided sturdy construction with a reed at the back, an adjustable tension knob, a heddle to make the cross, and a swiveling reed at the front to adjust the feeding width of the warp.
Special order this will ship direct from Schacht in Colorado.
Click here for expected shipment time.
Free Shipping to your continental U.S. physical address that matches your payment card account. Or if you are picking up at our location.
Enter Discount Code: SCHACHTFREESHIP
Do not enter discount code if shipping to a P.O. Box or Address that is not your card billing address.
Contact us for shipments to Alaska or Hawaii. Include your order and shipping address. We will invoice you total due with secure payment link.
764459905605
Warping mills are ideal for long warps. Instead of going back and forth with your arm to measure threads like on a warping board, the warping mill goes around and around which is quicker and less tiring.
6/3/26. Production of this Schacht product has been temporarily suspended. Sign up for email notifications If you would like to be notified when available to order.
Warping mill has a two yard circumference, will hold up to 18 yards of warp, and can be folded up for storage. It may be used on a table or the floor.
Special order this will ship direct from Schacht in Colorado.
Click here for expected shipment time.
Free Shipping to your continental U.S. physical address that matches your payment card account. Or if you are picking up at our location.
Enter Discount Code: SCHACHTFREESHIP
Do not enter discount code if shipping to a P.O. Box or Address that is not your card billing address.
Contact us for shipments to Alaska or Hawaii. Include your order and shipping address. We will invoice you total due with secure payment link.
The kit includes one plastic clamp, metal L-pin, and wing nut.
Cricket and Flip looms require two clamp blocks.
Cricket and Flip warping pegs require one clamp block.
Raddles require two clamp blocks.
Yardage Counters require one clamp block.
Fits all Cricket and Flip looms; all Cricket and Flip warping pegs; all raddles; all yardage counters.
Sold in increments of 10 metal pins. Raddle Part #3
Fits all raddles and Wolf raddles.
Raddles ship with pins installed at 1" spacing. They include extra pins for 1/2" spacing.
Wolf Pup and 20" raddle: 38 pins total
Baby Wolf and 26" raddle: 54 pins total
Mighty Wolf raddle: 72 pins total
40" raddle: 80 pins total
48" raddle: 96 pins total
The 15” Cricket Loom is compact, capable, and cute!
6/3/26. Production of the Quartet has been temporarily suspended. Sign up for email notifications If you would like to be notified when available to order.
The Cricket is made of high-quality maple plywood and hard maple and is left unfinished.
Each Cricket comes with an 8-dent reed (sorry, no substitutions).
Included in your loom kit: threading hook, warping peg, table clamps, two shuttles, and two balls of yarn (yarn colors will vary).
Cricket Loom Assemble and Weaving Manual PDF
Cricket Options:
Cricket Stand makes it easier than ever to use your Cricket Loom! It’s simple to put your Cricket on the stand and adjust the angle, and it’s quick to remove the loom when you take your Cricket out on the town.
The Cricket Stand is made of the same high-quality maple plywood as the Cricket and is left unfinished.
A 15" Stand will hold a 15" Cricket with or without the Cricket Quartet installed. The stand weighs about 3.5 pounds.
Loom trap is not included with stand, add it and have storage for your shuttles and tools.
Once you master Rigid Heddle Weaving Upgrade to harness weaving with the Cricket Quartet!
The Cricket Quartet. installs on your 15" Cricket Loom Transforming it into a 4-shaft/harness table loom with a 13-1/2″ weaving width.
Includes 300 Texsolv heddles (5-7/8″ red) and your choice of 6, 8, 10, 12, or 15 dent stainless steel reed (leave message when ordering with size you want)
Made of high-quality maple plywood and solid hard maple; left unfinished to match your 15″ Cricket Loom
Ships flat-packed, with assembly required
If you would like to add additional heddles or other accessories with your loom purchase, leave message when ordering, will invoice you with secure payment link.
Special order this will ship direct from Schacht in Colorado.
Click here for expected shipment time.
Free Shipping to your continental U.S. physical address that matches your payment card account. Or if you are picking up at our location.
Enter Discount Code: SCHACHTFREESHIP
Do not enter discount code if shipping to a P.O. Box or Address that is not your card billing address.
Contact us for shipments to Alaska or Hawaii. Include your order and shipping address. We will invoice you total due with secure payment link.
Schacht Spindle production delays
These delays only refers to equipment that ships from Schacht in Colorado, not from our Buckley WA studio.
Orders for Looms and Spinning Wheels will ship within 9 weeks.
Holiday Orders take a little longer to ship - Add shipping time after dates posted for delivery.
September 24 - Deadline for Loom orders, shipped by December 4
October 1 - Deadline for spinning wheel orders, ship by November 19
November 1 - Accessories and small orders, ship by December 10
Special Production in a limited-edition cherry run!
One in stock for pick up at our Buckley WA location.
If you need your wheel shipped contact us to see if still available to order.
The cutest spinning wheel around.
Spinners from beginners to experts love the Ladybug.
Cherry Ladybugs will sport a black drive wheel instead of the customary red one. The wheel comes with cherry medium and fast speed whorls, orifice hook, three travel bobbins, one poly drive band, one cotton drive band.
Made of high quality cherry plywood and solid cherry. Each Ladybug wheel is unique—somewhere on your wheel is your very own ladybug pal.
Product Specs
double treadle
double drive, Scotch tension, and bobbin lead tension modes
13-1/2 pounds
27" orifice height
16" drive wheel
3/8" orifice diameter
Danish oil finish
See diagrams for measurements.
Options available that can ship with your new wheel that ships direct from Schacht. Let us know your additions you would like to add.
WS6708C Extra Slow Speed Whorl, Cherry $53.00
WS6704C Slow Speed Whorl, Cherry $49.00
WS6706C Medium Speed Whorl, Cherry $49.00
WS6707C Fast Speed Whorl, Cherry $49.00
WS6705C High Speed Whorl, Cherry $49.00
WS6709C Super High Speed Whorl, Cherry $49.00
WS6601C Tensioned Lazy Kate, Cherry $107.00
LB6606 Ladybug Bulky Plyer Flyer, Cherry $475.00
LB6607 Ladybug Bulky Front Maiden & Bearing $95.00
WS6701C Spinning Wheel Bobbin, Cherry $72.00
WS6703C High Speed Bobbin, Cherry $72.00
WS6711C Bulky Bobbin, Cherry $95.00W
Contact us if you wished shipped. Include your order and shipping address. We will invoice you total due with secure payment link.
Spinning wheels shipped direct from Schacht in Colorado include Free Continental U.S. shipping.
Friendly to entry-level spinners, Easy Double Treadle. Scotch Tension. 16" drive wheel.
Stretchy poly drive band. Integrated carrying handles. Weighs only 12.5 pounds! Ideal as a travel wheel.
The Ladybug Spinning Wheel uses Scotch tension, and can also be used in double drive mode. The Ladybug comes with medium (7:1 - 9:1) and fast (10-1/2:1 - 12-1/2:1) flyer whorls.
Included with new Ladybug Spinning Wheel: Poly drive band, threading hook, three lightweight travel bobbins, medium and fast whorls, and double drive band. 2 year warranty against manufacture defects.
Order wheel with or without Built in Kate. Kate is ideal for bobbin storage or plying yarn when the separate kate is not available. If you travel with your wheel, this comes in handy.
Options: Extra bobbins, tensioned lazy kate, niddy noddy, whorls, if you would like to add any options to your spinning wheel order, leave message when ordering.
Click here for expected shipment time.
Free Shipping to your continental U.S. physical address that matches your payment card account. Or if you are picking up at our location.
Enter Discount Code: SCHACHTFREESHIP
Do not enter discount code if shipping to a P.O. Box or Address that is not your card billing address.
Contact us for shipments to Alaska or Hawaii. Include your order and shipping address. We will invoice you total due with secure payment link.
Schacht Matchless Spinning Wheels are the most responsive spinning wheel available today.
Double treadle action, you'll appreciate this wheels' matchless capabilities. If you desire one wheel that can meet all your spinning requirements- The Schacht will do it.
The Schacht Spinning Wheel offers Double Drive, Scotch tension, and Bobbin Lead modes of operation. Wheels come with two flyer whorls; Five other flyer whorls offer spinning ratios from 4:1 to 27.5:1.
Orifice Height 28 inches. Orifice diameter: 3/8". Weight of wheel approximately 17 lbs. Dimensions: 19.5" x 32.75" x 16.5"
The 19 1/2" drive wheel and flyer shaft are supported by self-aligning bronze bearings for precise action. Each flyer is individually balanced and the bobbins and flyer whorls are trued on center for long and superior service.
Lazy Kate - Great features of the Industrious Kate's sturdy, low profile, and tension control now a new, easy-to-take-along version that is simple to assemble and take apart. Holds standard bobbins or the bulky bobbins.
Included with each new Schacht Matchless: its own adjustable carrying strap, two drive bands, a threading hook, a lazy Kate, medium and fast whorls and four standard bobbins. 2 year warranty against manufacture defects.
If you would like to add any options to your spinning wheel order, leave message when ordering.
Click here for expected shipment time.
Free Shipping to your continental U.S. physical address that matches your payment card account. Or if you are picking up at our location.
Enter Discount Code: SCHACHTFREESHIP
Do not enter discount code if shipping to a P.O. Box or Address that is not your card billing address.
Contact us for shipments to Alaska or Hawaii. Include your order and shipping address. We will invoice you total due with secure payment link.
New Black wheel.
Lightweight at 13 pounds. Folds to 21 1/2" x 15" x 8 1/4".
Integrated storage of bobbins, flyer, and whorls for transport.
13 3/4" drive wheel allows for ratios from 4.25 to 15.25. Long, comfortable treadles.
Uses the same bobbins, whorls, and flyer as the Schacht Matchless and Ladybug wheels.
Included: The Sidekick comes with 3 travel bobbins. 2 whorls: Fast 9:1 and 11:1 and Medium 6.25:1 and 7.5:1. Threading hook, and adjustable carrying strap. 2 year warranty against manufacture defects.
25" orifice height for comfortable spinning. Employs Scotch tension with precise control knob. The drive wheel spins on ball bearings. The flyer turns on self-aligning bearings. Drive band tension adjuster allows for all whorls to be used with one drive band.
Options: Extra bobbins, niddy noddy, whorls,
If you would like to add any options to your spinning wheel order, leave message when ordering.
Special order this will ship direct from Schacht in Colorado.
Click here for expected shipment time.
Free Shipping to your continental U.S. physical address that matches your payment card account. Or if you are picking up at our location.
Enter Discount Code: SCHACHTFREESHIP
Do not enter discount code if shipping to a P.O. Box or Address that is not your card billing address.
Contact us for shipments to Alaska or Hawaii. Include your order and shipping address. We will invoice you total due with secure payment link.
6/3/26. Production of this Schacht product has been temporarily suspended. Sign up for email notifications If you would like to be notified when available to order.
The superb Flatiron spinning wheel is customizable; you can build it to your preference, with either the flyer on the left or the right.
With self-aligning bearings in the maidens, and a fully adjustable drive wheel, the whole system is sure to spin true.
Just as the Colorado landmark is recognized all over the world, the Flatiron, with its ingenious, compact packaging can be shipped anywhere with ease! With nearly all the tools necessary for assembly in the box, you can set this wheel up in just a few hours.
The clever quick release lever makes changing out bobbins trouble free. The Flatiron can be set up in all three tensioning systems combined with Schacht's thoughtfully designed fine threaded tension control.
All of the Schacht whorls can be used with the Flatiron, allowing you to spin the yarns of your dreams–from fine lace to art yarn.
Specifications:
Double treadle. Maple, apple-ply body.
Spinning modes: Scotch, double drive, bobbin-lead
Spinning ratios: 4.6:1 to 26:1
Weight: 15 pounds
Drive wheel: 22 1/2”
Orifice height: 26”
Dimensions: 33” wide x 33” tall x 18” deep
Included with wheel: 3 bobbins, medium and fast whorls, cotton and poly drive bands, threading hook. 2 year warranty.
Special features: Can be assembled with the flyer on the right or the flyer on the left. Packs flat for shipping.
If you would like to add any options to your spinning wheel order, leave message when ordering.
Special order this will ship direct from Schacht in Colorado.
Click here for expected shipment time.
Free Shipping to your continental U.S. physical address that matches your payment card account. Or if you are picking up at our location.
Enter Discount Code: SCHACHTFREESHIP
Do not enter discount code if shipping to a P.O. Box or Address that is not your card billing address.
Contact us for shipments to Alaska or Hawaii. Include your order and shipping address. We will invoice you total due with secure payment link.
Add plying and bulky yarn capabilities to any Schacht Matchless, Ladybug, Flatiron or Sidekick Spinning Wheel.
Features include a generously-sized 7/8” orifice, large capacity bobbin (about 8 ounces), sliding flyer hooks with incremental stops, and large round guide hooks. The Bulky Plyer Flyer comes with its own special front maiden, bulky flyer, and bulky bobbin. A cherry wood version for cherry Matchless spinning wheels is also available.
The Schacht Bulky Plyer Flyer Package comes with the bulky flyer, one bulky bobbin, front maiden and bearing for either the Matchless, Ladybug, or Sidekick Spinning Wheel.
The Bulky flyer is interchangeable. Do you have multiple Schacht wheels? order the package for one wheel and the “bulky front maiden and bearing” for the other(s). The bulky flyer and bobbin can then be used on other Schacht wheels. If you would like to add a extra front maiden, leave message when ordering.
The regular, travel, and high speed bobbins fit on the bulky flyer shaft, so you don’t need to change flyers to use your existing bobbins.
The bulky bobbins fit on the Ladybug or the Collapsible Kate.
The whorl ratios do not change when using the bulky flyer.
MATCHLESS WHEELS - Include your wheel’s Serial Number when ordering.
Made of Maple, unless Cherry is listed.
Special order this will ship direct from Schacht in Colorado.
Click here for expected shipment time.
Free Shipping to your continental U.S. physical address that matches your payment card account. Or if you are picking up at our location.
Enter Discount Code: SCHACHTFREESHIP
Do not enter discount code if shipping to a P.O. Box or Address that is not your card billing address.
Contact us for shipments to Alaska or Hawaii. Include your order and shipping address. We will invoice you total due with secure payment link.
Special Production of Cherry Matchless Spinning Wheels has sold out.
Maybe Schacht will produce more in the future? Leave your email if you would like to be notified.
Price posted is the price of a maple Matchless. Cherry will be more expensive.
Package includes the loom plus 2 stainless reeds 10 and 12. Stroller, Wolf Trap, Raddle and Bench with 2 bags.
Loom and accessories are in new condition.
Pictures of actual loom upon request.
Can be purchased at pick up.
Pick up only. Located in Buckley, WA
$6,200 with cash payment. contact Elizabeth to set up a time
Mighty Wolf Looms in cherry are out of Production.
The Mighty Wolf has a weaving width of 36″ X-frame design. Its high castle includes a handy storage tray
The adjustable beater allows the position of the shuttle race to be raised or lowered if necessary. The Wolf employs a friction brake on the warp beam which lets you advance the warp smoothly.
Weaving Width - 36"
Loom Width - 45"
Height at Breast Beam - 29.5"
Height w/Castle - 41"
Height Folded - 48"
Depth Open - 33"
Depth Closed - 17"
Weight - 100 lbs.
Heddles - 1000