Ashford Handcrafts Production Delays

❊❊❊ These delays only refers to supplies that ship from Ashford in New Zealand, not from our stock in Buckley WA.

  • DON’T DELAY ORDERING. Manufacture may sell out before the next production. Dates shown is the next production date. If you see date pending the next production has already sold out and/or a new production date has yet to be scheduled.

  • All shipments to the USA are sent “Delivered Duty Paid.” All duties/tariffs “taxes” & import fees are included in the purchase price.

If delay to ship is an issue, contact us before ordering for current status. Bank transaction fees are not refundable on cancellations.

Backorder Report as of September 21, 2026

Spinning

DDSW Traditional Spinning Wheel Double Drive Natural Date Pending - to be advised

DDSWL Traditional Spinning Wheel Double Drive Lacquered Date Pending - to be advised

ESP3 e-Spinner 3 - Includes carry bag and foot switch ETA 9 October

SHFDD Sliding Hook Flyer Double Drive with bobbin Date Pending - to be advised

SHFDDL Double Drive Sliding Hook Flyer & Bobbin Lacquered Date Pending - to be advised

Weaving

BSB10 Boat Shuttle Nylon Bobbins - Packaged 10pcDate Pending - to be advised

BSBXL10 Boat Shuttle Nylon Bobbins Extra Long - Packaged 10pcDate Pending - to be advised

KLSV Knitters Loom Stand Variable - Lacquered Date Pending - to be advised

RDKL5/10 Reed Knitters Loom 50cm / 20"" - 10 DPI (40/10) Date Pending - to be advised

RDKL7/12.5 Reed Knitters Loom 70cm / 28"" - 12.5 DPI (50/10) Date Pending - to be advised

RDRH4/10 Reed Rigid Heddle Loom 40cm / 16"" - 10 DPI (40/10) Date Pending - to be advised

RDRH4/12.5 Reed Rigid Heddle Loom 40cm / 16"" - 12.5 DPI (50/10) Date Pending - to be advised

REED8/610 Stainless Steel Reed for Table Loom 61cm / 24"" - 8 DPI Date Pending - to be advised

RK6 Raddle Kit 60cm / 24"" - pins at 1/2"" spacings Date Pending - to be advised

RK8 Raddle Kit 80cm / 32"" - pins at 1/2"" spacings Date Pending - to be advised

TLES4 Table Loom Eight Shaft 40cm/16" with shuttle race Date Pending - to be advised

TLES6 Table Loom Eight Shaft 60cm/24" with shuttle raceDate Pending - to be advised

WM Warping Mill - 15m / 50'ETA 16 October

Carding

EDC30 e - Drum Carder - 72 PPSI - 30cm / 12"" Width Date Pending - to be advised

If your need is urgent please contact us before ordering. So we can confirm availability