Ashford 24" Table Loom 16 Dent Stainless Reed






Ashford 24" Table Loom 16 Dent Stainless Reed
High quality 5 inch Swedish stainless reeds available in standard lengths to fit Ashford table looms.
Ashford Reeds are available in 6, 8, 12 or 16 dpi and in varying lengths 12, 16, 24 or 32 inches.
Reeds ordered on this page are in stock.
REED 16/610 9418647142235
Ashford table loom stainless steel reeds are 5 inches (12.5 cm) tall and available in 16", 24", and 32" weaving widths, with actual lengths being slightly longer (approx. 3.5 cm or 3/4" extra) to fit the beater. They come in 6, 8, 10, 12, and 16 DPI (dents per inch) or 60-65/10cm.
Compatibility Note: These reeds are designed for current Ashford Table Looms. They may not fit older, discontinued versions of Ashford table looms. Be sure to measure your reed that you are replacing or adding.
Disclaimer: Reeds can be used across brands, but you must check the specific dimensions to ensure it fits.
High quality 5 inch Swedish stainless reeds available in standard lengths to fit Ashford table looms.
Add with your new Table or Floor Loom Order! or order when you need to add.
6, 8, 12 or 16 dpi and in varying lengths 12, 16, 24 or 32 inches.
Special Order item - Shipping will be delayed.
Ordering a Ashford loom today? Ashford loom and/or Ashford accessories not in our stock and is over $300 will ship from Ashford in New Zealand for the Flat Rate of $35. If you overpay on shipping we will refund. Air Shipments from Ashford in New Zealand allow 7-12 days for delivery.
Ashford special orders under $300 will be delayed until our next shipment from New Zealand then shipped from our location in Washington to you. Allow up to 6 weeks to deliver.
Wooden boat shuttle bobbin winder. Designed for winding bobbins for the Ashford boat shuttle or paper quills
Tapered stainless steel shaft (approx. 1/4" - 3/16"), nylon bearings, fast 12:1 ratio. Natural timber finish.
Note - shaft is too thin for Schacht boat shuttle bobbins. . . you can adapt by first sliding a paper quill, then the Schacht bobbin.
Winder includes clamp and 1 or 10 bobbins.
9418647140026
Stocked at our location in WA OR
Special Order item - Shipping will be delayed.
Ashford loom and/or Ashford accessories not in our stock and is over $300 will ship from Ashford in New Zealand for the Flat Rate of $35. If you overpay on shipping we will refund.
Air Shipments from Ashford in New Zealand allow 7-12 days for delivery.
Ashford special orders under $300 will be delayed until our next shipment from New Zealand then shipped from our location in Washington to you. Allow up to 4 weeks to deliver.
Create the perfect twisted fringe or decorative cord
Twist a fringe on scarves, handwoven garments or needlework projects. Twist yarn for embellishing, edging and jewellery. Twist fiber for felting fun.
Quick and easy
4 clips
Clamp included
Lacquered
In Stock or
Special Order or add to your Ashford New Zealand shipment. Click Here for details on Special Order shipments from Ashford New Zealand.
Beautifully shaped and well balanced.
The new design will reduce warp thread pick-up when weaving on a table loom, while still remaining well balanced and ergonomic to hold and throw.
Suitable for nylon or paper bobbins.
Shuttle includes 1 nylon boat shuttle bobbin. Lacquered finish.
Boat Shuttle 11.5” long. (uses standard bobbins)
Boat Shuttle XL 15″ long (uses XL bobbins)
The new XL design is beautifully shaped and well balanced to reduce warp thread pick-up when weaving on a table loom, while still remaining ergonomic to hold and throw. The XL nylon bobbin will give you 50% more yarn capacity than the standard nylon boat shuttle bobbin.
Items on this page are in stock for immediate shipping.
Follow link below for additional choices and accessories or if you are adding to a Ashford loom order.
Bobbins used with Ashford Shuttle Winder or Ashford Boat Shuttle.
Sold in packs of 10.
Pick Up Stick Add texture and visual appeal to weaving. Pick up threads behind your heddle with the pick up sticks to create different sheds.
You want your stick a little wider than your weaving width, 17” used with 16” Rigid Heddle loom. Stick width 1⅜ inches.
Wavy Stick Shuttles Create interesting and decorative patterns by beating the weft into place with our wavy shuttles. The shuttles have different size waves on each side and have a smooth lacquered finish.
Follow link below for more shuttle and weaving tools.
Label your table loom levers. Vinyl adhesive numbers 1-4, 1-8 or 1-16.
Out of Stock? Follow Loom Parts link below to order
Perfect for weaving tapestry, rigid heddle looms and weaving frames.
Weave techniques quickly and easily. Weave fabrics, yarns, fibers and more with a large eye for easy threading.
Set of 3 needles. 12cm (4 3/4') 17cm (6 1/2') 22cm (8 1/2')
Preserve, protect and enhance wheels, looms and all your craft accessories with this quick and easy to apply environmentally-friendly, low gloss finishing wax polish.
Made from beeswax and tree oils, it is ideal for new natural timber or rejuvenating and restoring loved and lacquered products. Apply with a soft rag, steel wool or Scotchbrite, then buff to a deep rich lustrous finish with a soft cloth. No other finish is required. Non-flammable, non-toxic. 75gms.
Ordering a new unfinished Ashford Loom or Spinning Wheel? Add this to your order and apply before assembly.
In Stock ships by next business day or Special Order (expect 6 week ship delay until our next shipment from Ashford in New Zealand)
9418647145663
Retrofit Shuttle Race kit for Ashford folding four, eight and sixteen shaft table loom.
Includes shuttle race, new beater arms, bungy cords and spanners.
*Fits all Ashford folding table looms with the curved beater arms.
16” 9418647412727
24” 9418647412734
32” 9418647412741
Special Order item - Shipping will be delayed.
Ashford loom and/or Ashford accessories not in our stock and is over $300 will ship from Ashford in New Zealand for the Flat Rate of $35. If you overpay on shipping we will refund. Air Shipments from Ashford in New Zealand allow 7-12 days for delivery.
Ashford special orders under $300 will be delayed until our next shipment from New Zealand then shipped from our location in Washington to you. Allow up to 6 weeks to deliver.
Boat Shuttle, Beautifully shaped and well balanced. Lacquered finish.
The new design will reduce warp thread pick-up when weaving on a table loom, while still remaining well balanced and ergonomic to hold and throw.
Shuttle includes 1 nylon boat shuttle bobbin. lacquer finish.
Boat Shuttle 29cm (11½”)
Boat Shuttle XL 38cm (15″)
The new XL design is beautifully shaped and well balanced to reduce warp thread pick-up when weaving on a table loom, while still remaining ergonomic to hold and throw. The XL nylon bobbin will give you 50% more yarn capacity than the standard nylon boat shuttle bobbin.
Special Order item - Shipping will be delayed.
Ordering a Ashford loom today? Ashford loom and/or Ashford accessories not in our stock and is over $300 will ship from Ashford in New Zealand for the Flat Rate of $35. If you overpay on shipping we will refund. Air Shipments from Ashford in New Zealand allow 7-12 days for delivery.
Ashford special orders under $300 will be delayed until our next shipment from New Zealand then shipped from our location in Washington to you. Allow up to 6 weeks to deliver.
High quality 5 inch Swedish stainless reeds available in standard lengths to fit Ashford table looms.
Ashford Reeds are available in 6, 8, 12 or 16 dpi and in varying lengths 12, 16, 24 or 32 inches.
Reeds ordered on this page are in stock.
REED 16/610 9418647142235