Featured
from $150.00
Strong frame made from solid Silver Beech hardwood, lacquered to match your 4 or 8 Shaft Ashford Table Loom.
With 2 handy shelves and 4 shaft treadle kit for direct tie-up. The loom fits onto the stand with no screws required. Stand and treadle kit fold flat for easy transport and storage.
When using the treadles for an eight shaft loom use the treadle for the first four shafts and the levers for the last four shafts, as treadles are designed for direct tie-up only.
Height from floor to base of table loom is 24½ inches.
Will Stand work with older Ashford Table Looms? If the loom has only one rail on the sides it will fit. The older ones with two rails on the sides will not fit.
$99.00
The loom is designed to create strong braids.
Inklette Loom has 10” warp adjustment.
Warp length 39" - 70” Warp width up to 2”
Weave intricate patterns and embellish with different types of yarns, beads and colors.
Make trims, tassels, bands, straps, chokers, dog leads and more. Portable. Strong design for high tension warps
For warp-faced braids and bands
The loom is made from Silver Beech hard wood and strongly constructed. The warp tension can be adjusted with the adjustable tension peg.
Compact size for portability and easy storage. 1 Belt shuttle included.
Includes full color step-by step Learn to Weave on the Inkle Loom booklet.
Out of Stock? Click to Special Order and get one from our next shipment.
$300.00
Table Model. This rotating mill is for quick and easy warping with the strain taken by the strong uprights and not the pegs.
The bars holding the cross pegs are moveable, so any length can be wound up to approximately 16 yards.
Ships as a kit, assembly required. Assembly Instructions
Depending on your location, this may ship direct from Ashford in New Zealand.
$150.00
Wooden boat shuttle bobbin winder. Designed for winding bobbins for the Ashford boat shuttle or paper quills
Tapered stainless steel shaft (approx. 1/4" - 3/16"), nylon bearings, fast 12:1 ratio. Natural timber finish.
Note - shaft is too thin for Schacht boat shuttle bobbins. . . you can adapt by first sliding a paper quill, then the Schacht bobbin.
Winder includes clamp and 1 or 10 bobbins.
9418647140026
from $17.99
Beautifully shaped and well balanced.
The new design will reduce warp thread pick-up when weaving on a table loom, while still remaining well balanced and ergonomic to hold and throw.
Suitable for nylon or paper bobbins.
Shuttle includes 1 nylon boat shuttle bobbin. Lacquered finish.
Boat Shuttle 11.5” long. (uses standard bobbins)
Boat Shuttle XL 15″ long (uses XL bobbins)
The new XL design is beautifully shaped and well balanced to reduce warp thread pick-up when weaving on a table loom, while still remaining ergonomic to hold and throw. The XL nylon bobbin will give you 50% more yarn capacity than the standard nylon boat shuttle bobbin.
Items on this page are in stock for immediate shipping.
Follow link below for additional choices and accessories or if you are adding to a Ashford loom order.
from $13.00
Pick Up Stick Add texture and visual appeal to weaving. Pick up threads behind your heddle with the pick up sticks to create different sheds.
You want your stick a little wider than your weaving width, 17” used with 16” Rigid Heddle loom. Stick width 1⅜ inches.
$25.00
Wavy Stick Shuttles Create interesting and decorative patterns by beating the weft into place with our wavy shuttles. The shuttles have different size waves on each side and have a smooth lacquered finish.
Follow link below for more shuttle and weaving tools.
$35.50
Perfect for weaving tapestry, rigid heddle looms and weaving frames.
Weave techniques quickly and easily. Weave fabrics, yarns, fibers and more with a large eye for easy threading.
Set of 3 needles. 12cm (4 3/4') 17cm (6 1/2') 22cm (8 1/2')
High quality 5 inch Swedish stainless reeds available in standard lengths to fit Ashford table looms.
Ashford Reeds are available in 6, 8, 12 or 16 dpi and in varying lengths 12, 16, 24 or 32 inches.
Reeds ordered on this page are in stock.
REED 16/610 9418647142235